How to smoke a boston butt?

How long do you smoke a Boston butt?

Place the pork butt roast in your smoker. Cook until the internal temperature reaches 160°F on an instant-read thermometer, about 6 hours.

How long does it take to smoke a Boston butt at 225?

At 225, figure roughly 2 hours per pound of meat, so the same piece of smoked pork shoulder takes from 12- 16 hours at 225. There are a lot of factors in how long it takes, including the humidity in the air, how consistent the grill holds temperature, the outside temperature, and more.

Should I wrap my Boston butt in foil?

The foil will keep the rendered fat right where you want it instead of spilling out over the hot coals. If you leave it unwrapped, the pork might dry out, which is the last thing you want after you’ve spent all day on the cook. … Wrapping the meat in foil can also give it a stronger flavor.

How do you keep a Boston butt moist when smoking?

There are at least a dozen methods you can use to prevent your meat from drying out during the smoking process:

  1. Choose your cut of meat wisely.
  2. Season with salt.
  3. Wrap meat in aluminum foil.
  4. Monitor smoking temperature.
  5. Baste or spray your meat.
  6. Avoid using too much smoke.
  7. Use a bowl or tray of water.
  8. Keep the lid closed.

How long smoke 5lb Boston butt?

A: A 5 pound pork shoulder (pork butt, Boston butt, picnic etc.) will require 10-14 hours of total cook time. Smoke the meat until it reaches 180°F for slicing or about 207°F for pulling. If you prefer, you can wrap it once it reaches about 160°F to speed up the process.

How long do you smoke Boston butt per pound?

A basic rule of thumb, but in no way is it an exact guide, is 90 minutes of smoking time per pound at 225° to 250°. Another way is to use a thermometer the entire time for indications on when your pork may be done. Remove it from the smoker once it reaches an internal temperature of 165°.

How long does it take to smoke 8 lb Boston butt?

With your smoker running steady at 225 degrees F, you can typically plan about 2 hours of cook time per pound of pork. For example, an 8-pound pork shoulder will take about 16 hours from start to finish.

Do you wrap a Boston butt when smoking?

Wrap in foil: At the 5-hour mark the internal temp should be in the 160 range. Wrap in aluminum foil to keep the meat from getting too much smoke and to catch the moisture being released during the cooking process.

What temp do you smoke a Boston butt?

I smoke Boston butts to a temperature of at least 190 degrees. If you like sliced BBQ , 185 degrees is fine but for pulled or chopped I want the final temp. to be at least 190. Once the internal temperatures reaches 190 I take the butt out of the smoker and immediately wrap it tightly with aluminum foil.

Should you inject a Boston butt?

It never hurts to bring some BBQ too, keeping the butcher happy is a good idea. Preparing your Pulled Pork Recipe for cooking I always inject pork butts. This helps get moisture and flavor on the inside of the meat that Dry Rub alone cannot accomplish.

How long does it take to smoke a 7lb Boston butt?

While every piece of meat will be different, the general rule for pork butt is that it will need 90 minutes to smoke for every pound of meat. As such, a 7 pound pork butt like the one in this recipe will take approximately 10 and a half hours to fully cook. Get to the smoking process.

How long does it take to smoke a Boston butt at 200 degrees?

Place pork butt in aluminum pan and wrap tightly with foil. Place back in smoker (or oven) until internal temperature hits 200. For a 10lb butt this usually takes me 10 – 12 hours.

How do you keep pork butt from drying out in smoker?

While not all pitmasters wrap their meat in the final stages of a cook—in barbecue circles, wrapping in foil is known as the “Texas crutch”—wrapping is an effective way of finishing a long cook time without drying out the smoking meat (after 10 hours, a bone-in smoking pork shoulder should register an internal …

Why is my smoked pulled pork dry?

Wrapping Pork Butt Keeps It Moist

Meat will absorb most of the smoke in the first few hours. After that, it doesn’t take on much more. Pork shoulders take 5+ hours to cook, which puts it at risk of drying out.

How do you add moisture to pulled pork?

If your pulled pork is dry, it’s probably because it’s overcooked. You can help the meat retain moisture by keeping it warm in a slow cooker, ideally with a bit of water or chicken stock added. To keep the pulled pork from drying out during storage, consume any leftovers within 3 days.

How long does it take to smoke a Boston butt at 250 degrees?

At 250 degrees, boneless pork shoulder should cook at a rate of about 90 to 95 minutes per pound. To put it in practical terms, this means that a 10-pound cut of pork shoulder will be done in around 15 to 16 hours.

What wood is best for smoking Boston butt?

Maple is a common choice for smoking pork butt. It’s easy, it gets the job done, and it’s consistent. Maple is the perfect choice in between the sweetness of a fruit wood like apple or cherry, and the strong smokiness of hickory or oak.

Can I cook pulled pork at 275?

Cook the pork shoulder in a 275° F oven, or on the grill over indirect heat, until the internal temperature reaches 180° F to 190° F—about 6 hours. The meat should be very tender and easily pull away from the bone. … Season the meat to taste, then pile it high on soft, sweet bread.

Can you overcook pulled pork?

By the way, just as it’s possible to overcook beef in a beef stew, it’s quite possible to overcook pulled pork. You want your pork to be pull-apart tender—an indication that the connective tissue has broken down—but not so cooked that the muscle fibers themselves start to lose structure and turn to mush.

How long should pork butt sit?

A resting time of 30 minutes is preferable when making pulled pork. You can let the meat rest for anywhere from 15 minutes to 2 hours, but you should target the 30-45 minute range for best results. Try not to wait too long, or the meat might get cold, especially if you’ve left it uncovered.

Is injecting meat worth it?

Injecting, or enhancing as food processors call it, is a sure fire way to get the flavor and juiciness down deep. And it is the only way to get fats, herbs, spices and other large molecules deep into meat. … It is like brining and the salt helps retain moisture as well as enhances flavor.

What should I inject Boston butt with?

​Injection Solution

  • ​Large meat syringe.
  • Apple juice or apple cider vinegar.
  • 1/2. Cup Unsalted butter, melted.
  • 1/2 Cup Chicken broth.
  • Tablespoons. Spice dry rub.
  • Tablespoons Lemon juice.
  • Tablespoons White pepper.
  • Tablespoons Cayenne pepper.

How do you inject a pork butt without a injector?

All you need to do now is to use a fork as well as poke holes into the meat’s skin. Next, take a large foodservice bag as well as place the meat in it. Finally, take the marinade and pour it over the bag. And yes, that’s all you need to do for injecting meat without an injector.

At what temp is smoked pork shoulder done?

Keep the smoker temperature around 250-275 F degrees while smoking during these first several hours. Smoke for approximately 4 hours, spritzing with the spray bottle every hour. Check the internal temperature of the pork shoulder using a meat thermometer. By this time, the pork should be at LEAST 145 F degrees.

Is Pulled Pork done at 180?

Pulling the Pork

Once the meat reaches an internal temperature of 180 F to 190 F, it is ready to be pulled. You can serve the meat once it reaches 165 F, but it won’t be tender enough to pull apart properly.

Is 200 too low for smoking?

Although brisket can be prepared at slightly higher temperatures (we usually recommend 225 degrees, but it’s possible to turn the smoker up to 275 and still end up with good results), 200 degrees is perfectly acceptable. Be forewarned, however, that you’ll be in for a long wait if you set the temp this low.

Do you flip pork shoulder when smoking it?

It is very important that you place the meat with its bone at the bottom for this will help form the rendered fat which will keep the meat moist. Once you begin the cooking process, just leave the pork alone and let the heat do all the magic. I don’t even prefer flipping it or turning it size wise while it is cooking.

How do you add moisture to a smoker?

  1. Water Pan – Use a water pan in your smoker to maintain a humid environment so the meat doesn’t cook with hot, dry air. …
  2. Spritzing – Many pit-masters keep a spray bottle filled with stock, apple juice or spray butter handy, spritzing the meat when the surface starts to dry.

What can I use to spritz pulled pork?

Spritz for Pulled Pork

Make sure you have a food safe spray bottle. Fill it with equal parts apple cider vinegar and apple juice (or just apple cider vinegar and water, which is our preference to cut down on excess sweet. Or just get creative with your mixture).

How do you tenderize a Boston butt?

Rub the butt with you favorite rub

Turn the fat layer side up in the pan, cover with plastic wrap and place the Boston butt in the refrigerator for at least 8 hours or overnight. This allows the acid in the apple juice to tenderize the meat and allows the rub to seep into the meat from the outside.

How do you keep pulled pork moist after pulling it?

Place your whole butt or shredded pork in an ovenproof dish and add in a little liquid to replace some of the lost moisture. This can be apple juice, cider vinegar, broth, or a thick BBQ sauce. Cover the dish in a double layer of foil, to lock in the moisture, and set it on a baking tray in the middle of your oven.

What temperature do you want pulled pork?

Pork butt needs to be cooked to 195 degrees Fahrenheit before it’s tender enough to shred. If it’s allowed to cook to 200-205 degrees, the meat will be even softer, which makes it that much easier to pull apart.