How to make a can pipe?


  1. Get a pull-tab aluminum can. …
  2. Get a needle, pin or other sharp object. …
  3. Make an thumb-sized indention on side of the can. …
  4. Poke small holes. …
  5. Poke a large hole on the side. …
  6. Remove the tab off the can. …
  7. Condition the pipe by heating the smoking area and the adjacent area of the can. …
  8. Smoke.

Can you use a can as a pipe?

It is really easy to make a basic pipe from a soda can, as long as you have a sharp object or two lying around. Rinse the can with warm water and allow it to dry before proceeding. Use your thumb to make an indentation on the side of the can opposite the side where you will smoke from.

How do you turn a pipe into a can?

How To Make A Can Pipe – YouTube

How do you smoke bud out of a can?


  1. Get a pull-tab aluminum can. …
  2. Get a needle, pin or other sharp object. …
  3. Make an thumb-sized indention on side of the can. …
  4. Poke small holes. …
  5. Poke a large hole on the side. …
  6. Remove the tab off the can. …
  7. Condition the pipe by heating the smoking area and the adjacent area of the can. …
  8. Smoke.

How do you make a bowl to smoke?

Form a bowl with aluminum foil.

Use a small square of aluminum foil to create a bowl on the top of the water bottle. Gently push the aluminum foil down into the drinking hole of the bottle, and then wrap the extra foil around the sides of the lid.

How do you make a bong pipe?

How to make water bottle bong – YouTube

How do you make a smoking pipe at home?

You need a discarded toilet paper roll, aluminum foil, a needle, scissors, and your herbs. Step 2: Take a discarded toilet paper roll or paper towel roll and cut a round hole in the side for the bowl. Step 3: Cover the hole in the foil, then poke holes in the foil with the needle. Step 4: Add your herbs to the bowl.

How do you make a starburst pipe?


  1. Unwrap the Starburst pieces and press them on top of one another so they stick.
  2. Take your skewer and cut a hole 2/3 through the length of the stack.
  3. Make a rounded hole on top of the stack to create your bowl.
  4. Now pack that business and enjoy!

What can I use as rolling paper?

Here are some things we’ve learned about what to use around the house to get your smoke on—legally,of course.

  • Corn Husks Aren’t Just for Tamales. Corn husks, mostly used for tamales, are readily available in most Latine kitchens. …
  • An Apple A Day. …
  • Toilet Paper Rolls. …
  • Aluminum Cans. …
  • Tin Foil.

How do you make a bong without a cone?

To make a water bottle bong, find an empty plastic water bottle and take the cap off. Then, cover the mouthpiece with a 2.5 by 2.5 inch piece of aluminum foil. Press down on the aluminum foil with your thumb so it’s bowl-shaped and then poke 6 holes in the foil with a toothpick or hairpin.

How do you make a 2 liter bong?

How to Make a Water Bottle Bong – YouTube

Can you use tissue paper to roll a joint?

You can use any tissue paper, but uncolored is the best because it doesn’t contain dye. … After that, roll the paper by pinching it between your fingers. Roll it as you go. Pack the end of your joint well because tissue paper is thinner.

How can I smoke a cigarette without a pipe?

8 Ways to Smoke without a Pipe or Papers

  1. Yard Bong.
  2. An Apple.
  3. Hot Knife Method.
  4. Eat It.
  5. Can Pipe.
  6. Hollowed-Out Cig.
  7. Smoke the Nug Whole!
  8. Tin Foil Pipe.

Can I use a coffee filter as rolling paper?

Yes you can but the coffee filter will burn very rapidly and many times catch on fire. It is not recommended as you will waste a lot of weed. A page from the Bible works much better if you have nothing else to use. You can also use a hollowed out pen as a pipe, or an apple.

Can you use gum paper to roll a blunt?

No, you cannot use a gum wrapper. Don’t be a ding ding and just use a rolling paper. I have before tapped the tobacco out of a cigarette and used that.

How do you make a cone out of foil for a bong?

Create a cone.

Roll the square into a tube that is slightly flared at one end (like a very narrow cone). The narrow end will be the end you will smoke from. If you want to, use a pencil or barrel of a pen to roll the foil around at the point.

How do you make a gravity bong without foil?

Instead of tin foil, you can use a socket or bowl piece for the bowl. Foil can change the taste of your substance and holds onto smells much longer. If you find yourself burning your finger after lighting the bowl, poke a small hole high on the side of the bottle to use for sucking up smoke.

How do you make a pipe out of a glass bottle?

How to drill a hole in a GLASS bottle – Bong Tutorial – YouTube

What is a Sploof?

A sploof is a simple, cylindrical device that uses a filtering material and whose job is to filter the smoke. You can purchase a sploof but you’ll pay a lot for a decent one. If you can’t afford to purchase one, making one of your own is simple but generally less effective.

How do you make a blunt out of a tea bag?

Pack the herbs into a tight roll and tuck the edge of the paper under the herbs. Keep rolling up the rest of the rolling paper. Once you get to the sticky strip, lick it and press it down into place. Seal the non-filter side of your tea joint by pinching and giving it a little twist to close it.

How can I smoke without getting dry socket?

2. Avoid smoking and tobacco

  1. Switch to a nicotine patch.
  2. Wait at least 48 hours after your surgery before smoking. …
  3. Ask your dentist for stitches on your surgery site.
  4. Keep gauze in place over your socket while smoking.
  5. Avoid nicotine gum or chewing tobacco.
  6. When you’d normally smoke, distract yourself with a new habit.

Can pipe tobacco be rolled?

As long as the pipe tobacco isn’t overly ‘stemmy’, or extremely coarse cut, you can roll (I actually use and injector type machine) pipe tobacco just fine. You don’t want to fill the machine too tightly, or you won’t get a good draw. But a little experimenting, and it’s works fine.

How do you make filters?

How to make The 3 Best filtertips for your Joint – YouTube

What kind of glue is used on rolling papers?

The traditional adhesive for rolling papers is gum arabic, also known as sugar gum. This is a natural gum from the Acacia tree, it is completely safe and nontoxic. In fact, it’s the same gum used on stamps and envelopes. It’s easy to mix and use.

How do you make a cone piece out of metal?

Making Heavy Metal Cones – YouTube

What can I use instead of a bowl for a bong?

Use a glass or wood pipe whenever you can to ensure that you’re not harming your body, and never inhale aluminum foil or tape. While it isn’t technically a bowl, you can always use a metal pen if you have want to make a simple pipe as an alternative.

Can you use aluminum foil for a pipe screen?

In case you don’t want to go for the ear-bud option and want something more simple to follow, you can make a DIY weed pipe screen with tin foil. Just cut a piece of aluminum foil and shape your screen to the bowl. Then, grab a toothpick or a paperclip and poke some holes through the foil.